|
HVAC
Coils, Space Coolers and Air Handling Equipment
Coil Company builds HVAC Coils of all types, Industrial Coils,
"Quickaire" Fan/Coils, and Rooftop Air Handlers,
"Quickaire" Belt Drive Air Handlers, Space Coolers,
and Stock Hot Water Booster Coils.
Chilled
Water Rooftop - 2 thru 20 tons
Standard construction specifications and optional features
of the chilled water rooftop air handler.
DX
Rooftop-2 thru 20 tons
Standard construction specifications and optional features
of the dx rooftop air handler.
Coil
Installation and Operating Instructions
Installation, operation and maintenance information for coils.
Product
Literature
HVAC & industrial systems coil information.
Replacement
or New HVAC Coils
Chilled Water, Hot Water, Steam, DX or Condenser Heavy duty
industrial coils of all types.
Steam
Coils
Standard and steam distributing. Applications include preheat,
boosters, reheat, duct heaters, process air and gas heaters
and more.
Hot
Water Coils
Applications include booster heat, reheat, waste heat reclamation,
pre-heat, fluid process heat & more.
Evaporator
Coils
For applications including comfort and process cooling, dehumidification,
energy reclamation, and more.
Chilled
Water Coils
For applications including comfort cooling, dehumidification,
process cooling, and more.
Hot
Water Duct Booster Coils
More than 50 different sizes stocked, one and two row copper
tube, aluminum fin type.
Refrigerant
Condenser Coils
For applications including storage, process, and comfort refrigeration.
Industrial
Coil Construction
For steam heating, hot water or glycol heating, chilled water
cooling, refrigerant cooling.
Space
Coolers
A Space Cooler from Coil Company is the answer to your special
cooling and dehumidification needs. And, it fits right into
a standard 2' x 4' suspended ceiling panel, with no floor
space needed.
Installation
and Operation Instructions
Installation, operation and maintenance instructions for space
coolers.
Air
Cooled - Grille Diffuser Space Cooler
For both air cooled or water cooled applications. Units designed
for mounting above 2 ft. x 4 ft. suspended panel opening.
Provides comfort and temperature control for many types of
areas.
Air
Cooled - Double Duct
Provides comfort and temperature control for many types of
areas.
Water
Cooled - Grille Diffuser
Standard and options features of a water cooled grille diffuser.
Water
Cooled - Single Duct
Electrical Components to include: contactor (for AC or WC
units only), relay(s), control transformer and power supply
connections.
Water
Cooled - Double Duct
An optional feature of the water cooled - double duct is a
remote thermostat, wall mounted (can be combined with 3 speed
switch).
Chilled
Water - Grille Diffuser
The chilled water grille diffuser has a 3 speed, long life
motors for single phase operation.
DX
- Grille Diffuser
Electrical Components to include: contactor (for AC or WC
units only), relay(s), control transformer and power supply
connections.
Quickaire
Fan Coil Units
Chilled Water Horizontal and Vertical or DX Horizontal or
Vertical.
Water
Horizontal Basic 200-1200 cfm
UL and cUL approved, ARI certified and 100% factory tested.
Water
Horizontal Ceiling Flush 200-1200 cfm
Heavy-gauge galvanized steel insulated cabinet with neoprene
coated 1/2", over three-pound density fiberglass insulation.
Water
Horizontal Basic - 600 to 2200 cfm
1/2" OD copper tube with aluminum fins (12FPI) equipped
with manual-air vent.
DX
Horizontal Basic - 600 to 2200 cfm
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
Water
Horizontal Deluxe - 600 to 2200 cfm
One-inch duct collar on supply-air openings. One inch duct
collar on return and supply air openings.
|
|
DX
Horizontal Deluxe - 600 to 2200 cfm
Heavy-gauge galvanized steel cabinet insulated with neoprene
coated 1/2", over three-pound density fiberglass insulation.
Water
Horizontal Cieling Flush 600- 2200 cfm
All motors are 3-speed, 115V/1/60 PSC with quick-connect plug.
DX
Horizontal Ceiling Flush - 600 to 2200 cfm
Galvanized and powder coated drain pan epoxy with a 1/4"
thick closed-cell insulation and has primary and secondary
drain connections.
Water
Horizontal Rear Return Plenum - 600 to 2200 cfm
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
DX
Horizontal Rear Return Plenum - 600 to 2200 cfm
Added Features - Protextive cardboard covers openings during
shipment and construction. Each unit is tagged and crated
as scheduled for installation.
Water
Horizontal Bottom Return Air Plenum - 600 to 2200 cfm
All motors are 3-speed, 115V/1/60 PSC with quick-connect plug.
DX
Horizontal Bottom Return Air Plenum - 600 to 220 cfm
One inch duct collar on return and supply air openings. Swing-down,
hinged return air grille/access door on deluxe and flush models.
Water
Vertical Basic - 200 to 1200 cfm
1/2" OD copper tube with aluminum fins (12FPI) equipped
with manual-air vent.
DX
Vertical Basic - 200 to 1200 cfm
Easy slide-out, draw through blower and motor assembly.
Water
Vertical Deluxe - 200 to 1200 cfm
All motors are 3-speed, 115V/1/60 PSC with quick-connect plug.
DX
Vertical Deluxe - 200 to 1200 cfm
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
Water
Vertical Slope Top - 200 to 1200 cfm
1/2" OD copper tube with aluminum fins (12FPI) equipped
with manual-air vent.
DX
Vertical Slope Top - 200 to 1200 cfm
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
Water
Vertical Low-Silhouette Basic - 400 to 600cfm
Heavy-gauge galvanized steel insulated with neoprene coated
1/2", over three-pound density fiberglass insulation.
DX
Vertical Low-Silhouette Basic - 400 to 600 cfm
1/2" OD copper tube with aluminum fins (12FPI) equipped
with manual-air vent.
Water
Low-Silhouette Vertical Deluxe - 400 to 600 cfm
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
DX
Vertical Low-Silhouette Deluxe - 400 to 600 cfm
UL and cUL approved, ARI certified and 100% factory tested.
Water
Bottom Top Vertical - 400 to 1200 cfm
Coils are 100% underwater pressure tested at 350 PSI with
a 300 PSI working pressure.
DX
Bottom / Top Vertical - 400 to 1200 cfm
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
Water
Front / Top Vertical - 400 to 1200 cfm
1/2" OD copper tube with aluminum fins (12FPI) equipped
with manual-air vent.
DX
Front / Top Vertical - 400 to 1200 cfm
Heavy-gauge galvanized steel insulated with 1/2" thick,
over three pound density, neoprene coated fiberglass.
Stock
Hot Water Booster Coils
Coil Company has hot water duct booster coils of all types.
Stock
Shipment Coil Specifications (1 Day)
Special
Production Coil Specs [2-3 Weeks]
Quickaire
Belt Drive Air Handlers
Coil Company carries Chilled Water Horizontal and Vertical,
DX Horizontal and Vertical and Chilled Water Vertical.
Chilled
Water Horizontal - 2 thru 30 tons
Heavy-gauge galvanized steel insulated with 1/2" thick,
over three pound density, neoprene coated fiberglass.
DX
Horizontal - 2 thru 30 tons
Controls and motors are factory-wired and terminated in a
junction box for single-point power supply.
Chilled
Water Vertical - 2 thru 30 tons
Galvanized and powder coated epoxy with a 1/4" thick
closed-cell insulation and has primary and secondary drain
connections.
DX
Vertical - 2 thru 30 tons
UL and cUL approved, ARI certified and 100% factory tested.
Request
Pricing
Contact
Information for Coil Company
3223 Phoenixville Pike
Malvern, PA 19355
Phone: 610.251.0257
Fax: 610.251.0805
Toll Free: 800.523.7590 |
|
